Towing may look straightforward, but even small mistakes can lead to accidents, vehicle damage, or costly fines. Many drivers attempt to handle towing themselves without understanding the risks involved. At CNB Towing, we have seen the consequences of these errors firsthand, which is why we emphasise safe practices and professional support. In this post, we will outline the most common towing mistakes and explain how to avoid them—so your vehicle, and everyone on the road, stays safe.
Common Towing Mistakes to Avoid
1. Overloading the Tow Vehicle
One of the most common towing mistakes drivers make is exceeding the weight limit of their car or tow vehicle. Overloading puts unnecessary strain on the engine, transmission, and brakes, while also making the setup unstable on the road. It can lead to poor handling, longer stopping distances, and in worst cases, complete loss of control.
How to Avoid It:
Always check your vehicle’s Gross Vehicle Mass (GVM) and Gross Combination Mass (GCM) before towing. These figures tell you the maximum weight your vehicle can safely carry and tow. If you are unsure about your load capacity, CNB Towing provides the right trucks and equipment to handle heavy vehicles, machinery, and containers securely, removing the guesswork and keeping your journey safe.
2. Improper Weight Distribution
Even when the load is within limits, placing too much weight at the front, rear, or on one side of a trailer can cause dangerous sway and instability. Unbalanced loads put uneven pressure on tyres, increase the risk of jackknifing, and make it harder to steer or brake safely.
How to Avoid It:
Always aim for balanced weight distribution, keeping around 60% of the load toward the front half of the trailer and securing it with quality tie-downs. If you are transporting machinery, containers, or oversized vehicles, CNB Towing uses specialised equipment and trained operators to ensure every load is evenly positioned and safely restrained—so your vehicle arrives without risk.
3. Neglecting Towing Mirrors and Visibility
Limited visibility is one of the most significant risks when towing. Many drivers skip installing proper towing mirrors, making it challenging to monitor blind spots or see approaching traffic. This not only increases the chance of accidents but can also result in fines, as adequate visibility is a legal requirement in South Australia.
How to Avoid It:
Always fit extended towing mirrors when your trailer or load is wider than your vehicle. They provide the clear rear view needed for safe lane changes, turns, and reversing. At CNB Towing, our trucks are equipped with the right mirrors, lighting, and visibility tools to ensure maximum safety on the road, protecting both your vehicle and others around you.
4. Ignoring Road Speed and Braking Distances
Towing significantly changes how a vehicle handles, yet many drivers make the mistake of driving at normal speeds without accounting for the extra weight. Heavy loads take longer to stop, reduce acceleration, and make sudden manoeuvres unsafe. Pushing the speed limit while towing not only increases accident risk but can also lead to hefty penalties.
How to Avoid It:
Always drive slower than you would without a load, and allow extra distance between your vehicle and the one in front. Smooth braking and steady acceleration reduce stress on both the tow vehicle and trailer. CNB Towing’s professional operators are trained to manage speed and braking safely under all conditions, ensuring your vehicle is transported without unnecessary risk.
5. Using the Wrong Equipment or Attempting DIY Towing
Many drivers assume that any rope, chain, or vehicle can handle a tow. In reality, using the wrong equipment or trying a DIY solution can cause severe vehicle damage, equipment failure, or even accidents on the road. Without proper tilt trays, winches, and safety restraints, towing becomes unsafe for both the driver and other road users.
How to Avoid It:
Always use the correct towing equipment and a vehicle designed for the job. If you are unsure, it is safer and more cost-effective to call professionals. CNB Towing is equipped with purpose-built tow trucks, advanced recovery gear, and trained operators who ensure every job is done right the first time, removing the risks of DIY towing.
Conclusion
Towing mistakes like overloading, poor weight distribution, or using the wrong equipment can quickly turn a simple job into a costly and dangerous problem. By recognising these risks and avoiding them, you keep yourself, your vehicle, and others on the road safe. However, the best way to eliminate these challenges is to leave the job to professionals.
Why Choose CNB Towing to Avoid Towing Mistakes
At CNB Towing, we combine over a decade of experience with purpose-built tow trucks, advanced safety equipment, and 24/7 availability across South Australia. Whether it is an emergency breakdown, accident recovery, or scheduled vehicle transport, our team ensures your vehicle is moved safely, legally, and efficiently.
When you need a reliable solution and find yourself searching for an emergency tow truck near me, choose CNB Towing—we will get the job done right, every time.
Frequently Asked Questions
1. What is the most common towing mistake drivers make?
Overloading the tow vehicle or trailer—and not understanding its weight limits—is the most frequent error. Exceeding Gross Vehicle Mass (GVM) or Gross Combination Mass (GCM) compromises handling, braking, and safety on the road. Always check your vehicle’s towing capacity before you hook up.
2. Why is proper weight distribution important when towing?
Even a correctly weighed load can be dangerous if the weight is not balanced properly. An unbalanced trailer can sway, increase the risk of jackknifing, and create uneven tyre pressure, putting you in control-risk situations.
3. What towing equipment mistakes should I avoid?
Using the wrong hitch, incorrect ball size, or skipping safety chains are critical mistakes. A mismatched hitch or ball can cause disconnection, while improperly crossed safety chains may fail in emergencies.
4. How does tyre pressure affect towing safety?
Low tyre pressure increases friction and overheating risk, leading to blowouts—or even rollovers. It is vital to check tyre pressure on both your tow vehicle and trailer before setting off.
5. Can towing laws affect my journey?
Absolutely. Many regions require proper lighting, mirrors, and safety equipment, plus strict speed limits. Overweight trailers or non-compliant setups can incur severe fines—even legal trouble
